We are a modern high-tech enterprise integrating production and sales, committed to providing Laminated Waterproof WPC Door, Interior WPC Door, Raw Material WPC Door supply, engineering design and management consulting services. Our company evaluates its own value, pays attention to value management and can create maximum social value. The company attaches great importance to after-sales service, and regularly asks about the use of products and customer opinions. Our company adheres to the business philosophy of 'development and innovation, scientific management, customer first', constantly deepening reform, refining management, and providing customers with satisfactory products and services.

The method of painting the wooden door is as follows :1, white germ treatment, first with water putty plugging nail holes, cracks, collapse, dark pit and other defects, generally using wood color water gray, also have their own use, the principle is that the color must be the same as the color of wood; 

2. Complete grinding and leveling with 150 mesh wood sandpaper; 

3, brush the sealing primer again; Transparent primers can also be used instead; 

4, 180 wood sandpaper grinding; 

5, for the eye big wood can first rub a color paste, for the eye small wood such as pine do not have to rub color, rub color is relative to the characteristics of the process requirements to use; 

6, continuous brush 5-7 times transparent primer, to fill the eye shall be subject to, eye big wood such as manash paint is not recommended to spray, no time interval is not less than 4 hours; 

7, repair transparent putty, repair the last leakage defect; 

8, with 180 mesh dry abrasive paper grinding, then with 240 mesh 320 mesh grinding, finally with 600 mesh or stretch silk cloth polishing; 

9. Clean the dust thoroughly and clean the environment; 

10. Spray the first time with colored transparent top coat. After drying, grind small particles with     1000mesh sandpaper. 

11, then spray 2-3 times of paint, dry after light grinding granular prickly heat; 

12. Wash the nozzle with a semi-matte transparent finish, and polish prickly heat after drying;

13. Spray transparent finish coat 2-3 times, and acceptance is completed.

.

High quality and short delivery time are the sharp tools for our company to win over other competitors in the Waterproof Interior WPC Painting Door/WPC Door/Wood Plastic Composite Door/PVC Door market. We constantly pay attention to the development of the enterprise's own value, which is conducive to the long-term development of our company and the market. We establish a mutually satisfactory cooperation with our customers with good product quality and service.