Our company adheres to the theory of "systematic solution" to create exclusive PVC Film Wood Plastic Composite WPC Door, PVC Laminated WPC Door, WPC Architrave solutions for our customers. The company always provides customers with satisfactory products and considerate services, and is committed to becoming an expert in the industry. Our company has developed to this day, each step is the result of the hard work and wisdom of our employees, so we sincerely thank each and every one of them! We all always strive for excellence, whether based on the positioning of the industry itself, or play a role in promoting high-quality development. We always insist on customer first, serve customers with heart, and insist on impressing customers with our products.

The method of painting the wooden door is as follows :1, white germ treatment, first with water putty plugging nail holes, cracks, collapse, dark pit and other defects, generally using wood color water gray, also have their own use, the principle is that the color must be the same as the color of wood; 

2. Complete grinding and leveling with 150 mesh wood sandpaper; 

3, brush the sealing primer again; Transparent primers can also be used instead; 

4, 180 wood sandpaper grinding; 

5, for the eye big wood can first rub a color paste, for the eye small wood such as pine do not have to rub color, rub color is relative to the characteristics of the process requirements to use; 

6, continuous brush 5-7 times transparent primer, to fill the eye shall be subject to, eye big wood such as manash paint is not recommended to spray, no time interval is not less than 4 hours; 

7, repair transparent putty, repair the last leakage defect; 

8, with 180 mesh dry abrasive paper grinding, then with 240 mesh 320 mesh grinding, finally with 600 mesh or stretch silk cloth polishing; 

9. Clean the dust thoroughly and clean the environment; 

10. Spray the first time with colored transparent top coat. After drying, grind small particles with     1000mesh sandpaper. 

11, then spray 2-3 times of paint, dry after light grinding granular prickly heat; 

12. Wash the nozzle with a semi-matte transparent finish, and polish prickly heat after drying;

13. Spray transparent finish coat 2-3 times, and acceptance is completed.

.

We always take market opportunities as our guide and considerate service as our carrier to strictly control the quality of our Polymer Door Matte White Painting WPC Door. In order to further improve the structure and level of the talent team, the company constantly strengthens the training and education for employees, thus effectively maintaining the passion and vitality of the organization. Technical transformation has always been one of the work we pay much attention to, especially in recent years, we have increased the efforts of technical transformation.